Restore your Holosun EPS Carry Red Dot Sight

Occasionally, you may need to reinitialize your Holosun EPS Carry Red Dot sight to its factory settings. This can be helpful if you've been tinkering with the adjustments or are experiencing unexpected issues. Fortunately, resetting your Holosun is a easy process that can be completed in just How to factory reset holosun eps carry red dot? a few steps.

Initially ensuring your red dot sight is turned on.
Locate the small reset button on the rear of the device.
Employ a small object to press and hold the reset lever for approximately 7 seconds.
Release the lever and your Holosun EPS Carry Red Dot sight will reboot.
The red dot sight should now be returned to its factory settings.

Restore Your Holosun EPS Carry Red Dot back to Defaults

In case you've tweaked your Holosun EPS Carry red dot settings and want to go back to basics, resetting it to default configuration is a breeze. First, determine the tiny button on the side of your optic. Then, keep pressed it for around ten seconds until you see the indicator light change. Your Holosun EPS Carry is now reset to its factory settings, ready for precise aiming.

revive your Holosun EPS Carry Back to Life

Is your beloved Holosun EPS Carry experiencing some issues? Don't despair! A simple factory reset can often resolve the problem and get your red dot sight back to its former glory. Before you begin, remember to disconnect the battery from your Holosun EPS Carry to prevent accidental activation during the process.

To perform a factory reset on your Holosun EPS Carry, follow these straightforward steps:

Hold down the power button for approximately 10 seconds.
An indicator will flash, indicating that the reset is in progress.
Release the power button once the reset is complete.

Your Holosun EPS Carry should now be back to its factory settings. You can insert the battery and test your sight's functionality. If you encounter any further problems, don't hesitate to contactsupport team.

Return Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide

Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Accomplish these steps carefully to ensure a successful factory reset.

First, Energize your Holosun EPS Carry by pressing the power button.
After that, press and hold both the mode button and the up/down adjustment button simultaneously.
During continue holding these buttons, press the power button once.
The display will show a confirmation prompt indicating that the reset process is initiated.
Permit the process to complete. This may take a few moments. Once done, your Holosun EPS Carry will automatically power off.

After resetting your Holosun EPS Carry to factory settings, you will need to re-enter any desired customizations, such as brightness levels and reticule style. Refer to the user manual for detailed instructions on configuring your optic after a reset.

Reset All Settings on Your Holosun EPS Carry

To Factory reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Holding a specific button combination. Consult your Manual for the exact button sequence for your model. Once in the settings menu, look for an option that says "Factory Default". Select this option and confirm the reset. Your sight will then power off and restart with all settings Reinitialized to their default values.

Restore your Holosun EPS Carry with a Factory Original Settings

If your Holosun EPS Carry is acting funny, a factory reset might be the solution. This will restore your sight to its factory settings, clearing any custom configurations you've made. To execute this reset, observe these simple steps:

To begin, identify the reset switch on your EPS Carry.
Secondly, engage a small object, like a pen tip, to push the reset button.
As you hold the reset button engaged, power on your EPS Carry.
You'll blink a message showing that the reset is complete.

Once the reset is successful, your EPS Carry will be set to its factory settings.